17
Maintenance and Cleaning
Cleaning the machine at regular intervals prolongs its service life.
NOTE
: Unplug your machine and turn off the water inlet before performing any maintenance or cleaning.
Oil an
d lime may accumulate in the machine’s washing section. In case of such
accumulation:
Fill the detergent compartment without loading any dishes into the machine, select a program that runs at
high temperature, and start the machine. If this doesn’t work, use special cleansing material available in the
market.
Cleaning the door seals:
To clean the door seals, wipe them regularly with a damp cloth.
Cleaning the machine:
Clean the filters and spray arms at least once a week.
Do not use hard materials when cleaning your machine. Wipe with a fine material and a dampened cloth.
Filters
Check if any food wastes have remained on the coarse and fine filters. If there are any food scraps on the
filters, remove and clean them thoroughly under the tap.
a. Micro Filter
b. Coarse Filter
c. Metal/Plastic Filter
To remove and clean the filter
combination, turn it counter clockwise
and take it out by lifting upwards.
(1)
Pull and remove the metal/plastic filter.
(3)
.
Then pull the coarse filter out of the
micro filter.
(2)
Rinse it with lots of water
under the tap. Refit the metal/plastic
filter. Insert the coarse filter into the
micro filter in a way that the marks will
correspond to one another. Attach micro
filter into the metal/plastic filter and turn
to the direction of the arrow and it is
locked when the arrow on the micro
filter can be seen from across.
Never use your dishwasher
without a filter.
Incorrect filter of the filter will
reduce the washing effectiveness.
Clean filters are very important
for the machine to run effectively.
