18
Maintenance and Cleaning
Spray Arms
Check whether or not the holes for the upper and lower
spray arms are clogged. If there is any clogging,
remove the spray arms and clean them under water.
You can remove the lower spray arm by pulling it
upwards, while the upper spray arm nut can be
removed by turning it to the left. Be sure that the nut is
perfectly tightened when refitting the upper spray arm.
Hose Filter
Contaminants from the water inlet hose (sand, clay, rust etc.) which might occasionally be carried through
the water mains are captured by the inlet filter so as to avoid any damage to your machine and to forestall
yellowing and formation of deposits after washing.
Check the filter and the hose from time to time and clean them if necessary. The clean the filter, first turn off
your tap and then remove the hose. After removing the filter from the hose, clean it under the tap. Insert the
filter back into its place inside the hose. Refit the hose and turn the tap back on.
