8
Usage
Points to Consider when using Combined Detergent:
Always make sure to check the specifications of the product you will use and whether or not it is a
combined product.
Observe the instructions on the packaging when using such products.
If such detergents are in the form of tablets, never put them into the interior section or the cutlery
basket of the dishwasher. Always put the tablets into the detergent compartment in the detergent
dispenser.
They produce good results for certain types of usage only. If you are using this type of detergents,
you need to contact the manufacturers and find out about the suitable conditions of use.
When the conditions of use of such products and the machine settings are appropriate, they ensure
savings in rinse aid consumption.
Contact the detergent manufacturers if you are not obtaining good wash results (if your dishes stay
calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The scope of warranty for your
machine does not cover any complaints caused by the use of these types of detergents.
Recommended: If you want to obtain better results while using combined detergents, add rinse aid into your
machine and adjust the rinse aid setting to the lowest position.
Solubility of the tablet detergents produced by different companies can vary depending on the
temperature and time. Therefore, it is not recommended to use such detergents in short
programs. It is more suitable to use powder detergents in such programs.
Warning:
Should any problem, which you have not encountered before, arise with the use of this type of
detergent, contact the detergent manufacturer directly.
Filling with Rinse-Aid
Rinse aid is used to prevent white water drops, lime stains and white film strip-
shaped stains that may form on the dishes, as well as to increase the drying
performance. Contrary to popular belief, it is not only used for obtaining shinier
dishes but also for obtaining sufficiently dried dishes. For this reason, care should
be taken that there is an adequate amount of rinse aid in the rinse aid
compartment.
If the rinse aid light on the control panel turns on, fill the rinse aid compartment
with rinse aid. To put rinse aid in, remove the rinse aid compartment cap
(1)
by turning it. Fill the rinse aid
compartment with rinse aid until the rinse aid level indicator goes dark
(2)
. Refit the cap and close it by
turning it. By checking the rinse aid level indicator on the detergent dispenser, you can easily see whether or
not your machine needs more rinse aid. A dark indicator means that there is rinse aid in the compartment,
whilst a light indicator shows that you need to fill the compartment with rinse aid.
The rinse aid level adjuster can be set to a position between
1 and 6. The factory setting for rinse aid is the position 3.
You need to increase the degree of the adjuster if water
stains form on your dishes after a wash, whereas you need
to decrease the degree if a blue stain is left when wiped by
hand.
Warning:
As rinse aid residue left as a result of overfilling the rinse aid compartment will create extremely
high amounts of foam and thus reduce the washing performance, remove the excess amount of rinse aid by
wiping it with a rag.
