6
Installation
Fitting the Machine under a Counter
If you wish to fit your machine under a counter, check whether you have sufficient space under your
countertop and whether the wiring and plumbing is suitable to do so. If you decide that the space under the
countertop is suitable for fitting your machine, remove the worktop as shown in the illustration. If the
appliance is installed on a carpet floor, take care that the openings in its base are not obstructed.
To remove the worktop, remove the screws that hold the worktop which are located at the rear of the
machine; then push the front panel 1 cm from the front side towards the rear and lift it.
Adjust the feet according to the slope of the floor. Fit your machine by pushing it under the counter without
letting the hoses get crushed or bent.
Without Insulation
With Insulation
All Product
For 2
nd
basket
For 3
rd
Basket
Height
820 mm
830 mm
835 mm
Warning:
After removal of the worktop, the machine should be placed an enclosed area with the dimensions
mentioned above.
