NeuroMotive™ User’s Manual
LB-0336 Rev. 1.00
Page 39
General Tab
Figure 27 - General Tab
The General tab allows setting various behaviors of NeuroMotive™: what warnings it gives, processing statistics,
when it can record, etc.
1.
Warnings
These are notices that NeuroMotive™ can relay about its state to help ensure recording, especially in sync
with an NSP or CerePlex™ Direct, operates smoothly. The following warnings can be toggled:
Instrument Network -
Warns if NeuroMotive™ is not connected to an instrument such as an NSP,
CerePlex™ Direct or nPlayServer. This can appear on startup or if the instrument disconnects in the
middle of operation.
Remote Recording -
Warns if a remote device such as Central on another computer tries to trigger
NeuroMotive™ to record and it is unable to do so.
Recording Overload -
Warns if NeuroMotive™ is unable to keep up with recording and is
dropping frames.
Recording Client –
Warns if the user is trying to run NeuroMotive™ and Central on the same
computer and record with both, most computers will not be able to handle this load and data will be
lost.
2.
Display Statistics
These are various processing statistics that NeuroMotive™ can be toggled to display in the
Capture Status
window.
Time -
Displays the time elapsed from startup, the start of recording or the end of recording.
Frames Captured -
Displays the number of frames capture by the camera.
Frame Number –
Displays the current number of the frames shown during file playback.