
NeuroMotive™ User’s Manual
LB-0336 Rev. 1.00
Page 9
Setup
Hardware
Network Switch
If using NeuroMotive™ in conjunction with the NSP or CerePlex™ Direct, obtain a Gigabit network switch and
plug it into the wall.
NeuroMotive™ PC
Plug the NeuroMotive™ PC into an outlet and connect the display, keyboard and mouse to the back of the PC. Plug
one end of an Ethernet cable into the Ethernet port in the back of the PC and plug in the other end into the Network
Switch. If using the NeuroMotive™ Motion Capture PC then the following diagram should clarify which ports to
use for different connections:
Figure 3 - Motion Capture PC Connections
Licensing Dongle
NeuroMotive™ also requires connection of the NeuroMotive™ Software Licensing Dongle to an
available USB port.