BLACKMER SYSTEM ONE, Инструкции по установке, эксплуатации и обслуживанию

Страница: 4 / 57

1301-C00 page 3/56
MAINTENANCE SAFETY DATA
NOTICE:
Do not use the pump for any other
purpose than the liquid transfer
application for which it is originally
supplied.
If pumping hazardous or toxic fluids,
system must be flushed prior to
performing service.
Fluid must be handled and disposed of
in accordance with local and national
regulations.
Contaminated parts must be cleaned
properly following local and national
regulations.
Pump must be isolated by closing
suction and discharge valves before
working on the pump.
Personal protective equipment must be
worn if there is a potential for handling
hazardous or toxic materials.
. Hazardous or
toxic fluids can
cause serious
injury.
Failure to relieve system pressure prior
to performing pump service or
maintenance can cause personal injury
or property damage.
Only use quality fasteners of proper size
and material for application. If in doubt
use only OEM supplied fasteners.
Do not draw piping flanges to pump by
force as this may cause dangerous
strains within the pump case and
misalignment between the pump and
driver.
Do not adjust or disassemble any
pressure containing component or shaft
seal prior to depressurizing the primary
and auxiliary fluid systems. This will
ensure that no hazardous or high
pressure fluid is ejected that may cause
personal injury or equipment damage.
Hazardous pressure
can cause personal
injury or property
damage
Lock out power to the driver before
working on the pump. Failure to
properly lock out motor could result in
accidental start, causing personal
injury.
Wear proper safety equipment including
gloves, glasses, respirators and shoes
when working on the pump.
Do not touch the pump for any reason
while it is operating. Lockout or
uncouple the driver prior to personal
contact with the pump.
When handling the pump or any pump
components, take care to prevent
personal injury on any possible sharp or
odd-shaped surfaces.
Be extremely careful to avoid the
rotating components in the seal
chamber area. Make all adjustments
with the pump shut down and locked
out.
Hazardous
machinery can
cause serious
personal injury.
Do not apply heat to any component for
removal or disassembly. Use of heat
may cause an explosion due to trapped
fluid within the pump.
Explosive fluids will
cause severe
personal injury
death or major
property damage.
Always use a lifting device capable of
supporting the full weight of the pump
components or assemblies.
Heavy assemblies
can cause personal
injury or porperty
damage.
Failure to disconnect and lockout
electrical power before attempting
maintenance can cause shock, burns or
death.
Hazardous voltage.
Can shock, burn or
cause death.