Blackmagicdesign Teranex Mini HDMI to SDI 12G, Инструкция по установке и эксплуатации

Страница: 33 / 171

33
The ‘audio’ tab for Teranex Mini Audio to SDI 12G contains
the following settings.
Audio Input menu
This menu allows you to select between RCA, XLR, and
optical inputs.
If you have selected XLR, you can further select between
analog, AES/EBU, and timecode inputs.
Selecting AES/EBU allows the additional option of checking
‘sample rate conversion.’ When this is selected, the sample
rate of your SDI audio output will be forced to 48kHz, the
correct sample rate for television.
The audio input menu also allows you to chose which
channel pair, or channel quad in the case of AES/EBU audio,
of your SDI signal you wish to embed audio into, as well
as adjusting the audio gain.
You can bypass channels or channel pairs if you want to
avoid overwriting audio in your SDI signal.
Your Teranex Mini will retain its last settings whether applied
via switch, Smart Panel or Blackmagic Teranex Setup.
If reverting to switch control after removing the Smart Panel
or updating your converter’s settings via software, you may
need to toggle individual switches for new settings to
take effect.
Teranex Mini Smart Panel Settings
If you have installed the optional Teranex Mini Smart Panel
on your Audio to SDI 12G converter, the following menus
will be available - ‘audio,’ and ‘network.’ The settings
available in these menus are identical to those detailed in
the ‘Blackmagic Teranex Setup settings’ section above. For more information on changing settings using the
Teranex Mini Smart Panel, refer to the ‘changing settings
section in this manual.
Using Teranex Mini Smart Panel gives you access
to the same settings as Blackmagic Teranex Setup.
Teranex Mini Audio to SDI 12G Block Diagram
Optical In
Equalizer,
Re-Clocker and
10 bit De-Serializer
SDI Audio
Embedder
Stereo Audio
Analog to Digital
Converter
AES/EBU
Audio Sample Rate
Converter
Serializer and
SDI Cable Driver
Central Processor
and Firmware
Mini Switches
Embedded
SDI Out
Ch 1 Analog or
Ch 1&2 AES/EBU
Stereo In
L
R
Ch 2 Analog or
Ch 3&4 AES/EBU
or Timecode
SDI In
USB
Analog or AES/EBU
Input automatically
detects between
SD/HD/6G/12G-SDI
Analog or AES/EBU
Ethernet
with Power
Analog
Digital