Blackmagicdesign Teranex Mini HDMI to SDI 12G, Инструкция по установке и эксплуатации

Страница: 16 / 171

16
Teranex Mini - HDMI to SDI 12G
Convert HDMI outputs from devices such as HDV cameras,
Ultra HD cameras and game consoles to SDI with the choice
to embed audio from HDMI, AES/EBU or balanced analog audio inputs. This means you can send video signals from
HDMI over SDI using the longest SDI cables. You can even
add SDI outputs to computers with HDMI compatibility.
Connectors
1. Mini-B USB port
Connects to Blackmagic Teranex Setup via a Mac OS X or
Windows computer for changing settings and updating
your Teranex Mini’s internal software.
2. Switches
Adjustable switches for changing settings.
3. LED Multi-Use Indicator
Glows white when the converter is receiving power and
green when a valid video input signal is detected. Will flash
on/off to identify individual converters via Blackmagic
Teranex Setup.
4. Power
Standard built in IEC C14 connector for 90 - 240 volt AC
power supply.
5. HDMI
HDMI video input.
6. Ethernet PoE+
Connects to a network switch or computer so you can
change settings using Blackmagic Teranex Setup. The
Ethernet port also supports power over Ethernet plus.
7. SDI Out
SDI video output BNC connector.
8. SDI Out
Secondary SDI output BNC connector.
9. L - Analog or AES/EBU
Balanced left channel analog audio, or digital AES/EBU
audio input XLR connector.
10. R - Analog, AES/EBU or Timecode
Balanced right channel analog audio, or digital AES/EBU
audio input XLR connector. Can also be configured for
timecode input.
Switches
Teranex Mini HDMI to SDI 12G’s switches provide the
following settings:
Switch 8 - Analog Audio, AES/EBU Audio
Set switch 8 to ‘off’ to embed balanced analog audio. Set
to ‘on’ for digital AES/EBU audio. To use these inputs switch
7 must also be set to ‘on’.
Switch 7 - HDMI Audio, Input Audio
Set switch 7 to ‘off’ to select embedded HDMI audio, or to
‘on’ for analog or AES/EBU audio.
Switch 6 - Input Audio/Timecode
Set switch 6 to ‘on’ to input timecode via the R channel
audio XLR connector. Set to ‘off’ to input audio.
The switch legend on the base of your converter gives you
all the information you need to change conversion settings.
1 2
4 5
6 8 9 10 7 3
ETHERNET PoE+ SDI OUT
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
PUSH PUSH
HDMI IN
SDI OUT