Blackmagicdesign Teranex Mini HDMI to SDI 12G, Инструкция по установке и эксплуатации

Страница: 28 / 171

28
Analog Audio Channels Switch 6 Switch 5 Switch 4 Switch Diagram
15-16 ON ON ON
AES/EBU Audio Channels Switch 6 Switch 5 Switch 4 Switch Diagram
1-4 OFF OFF OFF
5-8 OFF OFF ON
9-12 OFF ON OFF
13-16 OFF ON ON
Blackmagic Teranex Setup Settings
The Teranex setup utility can change all the same settings
that are available using the switches, plus additional settings.
You can access these settings by moving between the
‘audio,’ ‘configure,’ and ‘about’ tabs.
The ‘about’ and ‘configure’ tabs are detailed in the ‘Changing
settings’ section in this manual.
The ‘audio’ tab for Teranex Mini SDI to Audio 12G contains
the following settings.
Audio Output menu
This menu allows you to select between analog, AES/EBU,
and timecode audio outputs, as well as which channels of
your SDI audio input you wish to de-embed. You can also
adjust the gain on the audio output.
Your Teranex Mini will retain its last settings whether applied
via switch, Smart Panel or Teranex setup utility. If reverting to
switch control after removing the Smart Panel or updating
your converter’s settings via software, you may need to toggle
individual switches for new settings to take effect.
Adjust your analog audio levels and AES/EBU levels using the ‘audio’
settings page in Blackmagic Teranex Setup.