4
HAWKER HURRICANE Item code: BH147
.
Instruction Manual
2. INSTALLING THE AILERON SERVOS
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Temporary pin to
keep hinge centered.
1)
Install the rubber grommets and brass eyelets on
to the aileron servos.
2)
Using a modeling knife, remove the covering from
over the pre-cut servo arm exit hole on the aileron servo
tray / hatch. This hole will allow the servo arm to pass
through when installing the aileron pushrods.
1. INSTALLING THE AILERONS
I. AILERON
Test fit the ailerons to the wing with the hinges. If the
hinges don’t remain centered, stick a pin through the
middle of the hinge to hold it in position.
Aileron
Flap
Bottom side.
REPLACEMENT SMALL PARTS
1. Oleo struts.
2. Wheels.
3. Plastic parts for bottom fuselage.
4. Plastic - engine mount.
5. Wood - motor mount.
6. Spinner.
7. Fuel Tank
8. Tail gear set.
See pictures below:
3 x 12mm
8
6
4x25mm
4
2x10mm
3x12mm
5x35mm
3x15mm
3x15mm
4x70mm
7
3
1
2
2
5
3x25mm
