ARROW 3D Instruction Manual.
18
1) We highly recommend setting up a
plane using the control throws listed.
2) The control throws should be measured
at the widest point of each control surface.
3) Check to be sure the control surfaces
move in the correct directions.
CONTROL THROWS.
Ailerons : 20mm up 20mm down.
Elevator : 20mm up 20mm down.
Rudder : 30mm right 30mm left.
Aileron Control
1) Completely charge your transmitter and
receiver batteries before your first day of flying.
2) Check every bolt and every glue joint in
your plane to ensure that everything is tight
and well bonded.
3) Double check the balance of the
airplane.
4) Check the control surface.
5) Check the receiver antenna . It should
be fully extended and not coiled up inside the
fuselage.
6) Properly balance the propeller.
We wish you enjoy.
PRE-FLIGHT CHECK.
