ARROW 3D Instruction Manual.
14
PUSHROD INSTALLATION.
Pushrod install as same as method of aileron
wing. See pictures below:
Elevator
pushrod.
Elevator
pushrod.
Rudder
pushrod.
Secure.
Rudder pushrod.
1) Using a modeling knife, remove the
covering from over the two main gear mounting
slots located in the bottom of the fuselage.
2) Using the two landing gear straps as a
guide, mark the locations of the four mounting
screws onto the fuselage surface.
3) The landing gear wire is held in place
using two nylon landing gear straps and four
wood screws.
Secure
2 X 10mm
MAIN GEAR INSTALLATION.
