PIPER CUB - EP.
INSTRUCTION MANUAL
10
INSTALLING THE MAIN GEAR WHEELS.
Mark the shape of the plywood on the left
and right side using a felt-tip pen.
SERVO INSTALLATION.
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
2. Mount the servo to the tray using the
mounting screws provided with your radio sys-
tem.
ELEVATOR INSTALLATION.
2 x 8mm
Nilon strap
Drill 2mm holes through the ply wood for
each of six mounting screws.
2 x 8mm
Secure
Bottom side
Mark point
