PIPER CUB - EP.
INSTRUCTION MANUAL
16
C/A glue.
6) When you are sure that everything is
aligned correctly, mix up a generous amount
of Flash 30 Minute Epoxy. Apply a thin layer to
the top and bottom of the vertical fin mounting
platform sides in the fuselage. Slide the verti-
cal fin in place and realign. Double check all of
your measurements once more before the
epoxy cures. Hold the vertical fin in place with
T-pins or masking tape and remove any ex-
cess epoxy using a paper towel and rubbing
alcohol.
C/A glue.
Installing control horns rudder as same as
method of aileron wing. See pictures below:
CONTROL HORN INSTALLATION.
Remove covering into the rudder slot
as picture.
Rudder control horn.
