PIPER CUB- EP.
INSTRUCTION MANUAL
17
Elevator
pushrod
Elevator
pushrod
Rudder
pushrod
Cut
Rudder servo
Elevator servo
3) Do not permanently secure the receiver
and battery until after balancing the model.
4) Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
1) Plug the servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch.
2) Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration.
INSTALLING THE RECEIVER AND BATTERY.
