Black Horce Model JU87-STUKA BH80, Инструкция по эксплуатации

Страница: 31 / 36

31
JU87-STUKA -
Item code: BH80
.
Instruction Manual

   1. Plug the servo leads and the switch
lead into the receiver. You may want to
plug an aileron extension into the receiver
to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.

   2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape
to hold the foam in place.

   3. Position the battery pack and receiver
behind the fuel tank. Use two tie wraps to
hold the battery and receiver securely in place.
As pictures below.
Do not permanently secure the receiver
and battery until after balancing the model.

 

4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver,
for the antenna to exit.
INSTALLING THE RECEIVER AND BATTERY.
switch
Tie wrap.
Tie wrap for battery.
Battery
1Locate the aluminium wing dihedral brace.
WING ATTACHMENT.
*** Test fit the aluminium tube dihedral brace
into each wing haft. The brace should slide in
easily. If not, use 220 grit sand around the
edges and ends of the brace until it fits prop-
erly.
Top side
Battery