Black Horce Model JU87-STUKA BH80, Инструкция по эксплуатации

Страница: 27 / 36

27
JU87-STUKA -
Item code: BH80
.
Instruction Manual
Epoxy glue
90º
Vertical
Stabilizer.
Horizontal
Stabilizer.
Hinge slot
Epoxy glue
 6) When you are sure that everything is a
aligned correctly, mix up a generous amount
of 30 minute epoxy. Apply a thin layer to the
slot in the mounting platform and to the verti-
cal stabilizer mounting area. Apply epoxy to
the lower rudder hinge. Set the stabilizer in
place and re-align. Double check all of your
measurements once more before the epoxy
cures. Remove any excess epoxy using a
paper towel and rubbing alcohol and hold the
stabilizer in place with T-pins or masking tape.
Allow the epoxy to fully cure before proceed-
ing.
 5. Put the vertical stabilizer back in
place. Using a triangle, check to ensure
that the vertical stabilizer is aligned 90 de-
gree to the horizontal stabilizer.
C/A glue
C/A glue.
C/A glue