Black Horce Model JU87-STUKA BH80, Инструкция по эксплуатации

Страница: 18 / 36

18
JU87-STUKA -
Item code: BH80
.
Instruction Manual

1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
Throttle servo
INSTALLING THE THROTTLE PUSHROD.
Front view
Secure
INSTALLING THE SPINNER.
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
Secure