Black Horce Model JU87-STUKA BH80, Инструкция по эксплуатации

Страница: 4 / 36

4
JU87-STUKA -
Item code: BH80
.
Instruction Manual

4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.

3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Secure

2) Using a modeling knife, remove the cov-
ering at possition show below.
Bottom side

5. Instal servo tray with aileron servo into
the wing as same as picture below.
Secure
Bottom side
Remove
covering
Electric wire
thread
Remove
covering
2x10mm.
M3 lock nut.
3mm x 40mm.
Nilon control clasp
.
Aileron
control horn
2.INSTALLING THE AILERON CON-
TROL HORN.