Black Box WRT4000-ANT, Руководство пользователя

Страница: 47 / 144

724-746-5500 | blackbox.com
Page 47
Chapter 4: Configuration—General Settings
3. Enter values in the fields shown to override MAC information sent by the router.
4. Then do one of the following:
a. If you wish to configure overrides for another MAC device, return to step 2.
b. If you have finished configuring host devices, do one of the following:
• If you wish to save the configuration, but not to use it until the router is restarted, select Save.
• If you wish to save the configuration and use it immediately, select Save and Apply.
• If you wish to discard the configuration, select Reset.
4.4 Configuration for the Network
4.4.1 DHCP and DNS
You can configure the WRT4000 Series Cellular Wireless Router's use of Dynamic Host Configuration Protocol (DHCP) and the
Domain Name System (DNS). Confer with your network administrator to determine values for fields in these configuration
screens.
1. On any WRT4000 Series Cellular Wireless Router operating system screen, select the Network tab. Then select the DHCP and
DNS tab. (And, if necessary, select the General Settings tab.)
• The browser displays the DHCP and DNS General Settings Screen (Figure 4-22) for configuration.
Figure 4-22. DHCP general settings screen.
2. When you have finished configuring the fields on this screen, select the Save button.
3. Then select the tab for Resolve and Hosts Files
• The DHCP and DNS Resolve and Hosts Files Screen is displayed (Figure 4-23) for configuration.