Black Box WRT4000-ANT, Руководство пользователя

Страница: 34 / 144

724-746-5500 | blackbox.com
Page 34
Chapter 4: Configuration—General Settings
3. Use an Ethernet cable to connect your management terminal to an Ethernet LAN port on the WRT4000 Series Cellular Wireless
Router’s rear panel.
CAUTION: Do not connect the management terminal to the WRT4000 Series Router's WAN port (labeled eth0).
• The LAN port assigns an IP address to your management terminal.
4. On the management terminal, open a Web browser.
NOTE: The example used in this procedure (connection to an Ethernet LAN port on the rear panel of the WRT4000 Series Router
chassis) is the most direct connection for managing the WRT4000 router’s operating system.
5. In the browser's address field, type the WRT4000 Series Cellular Wireless Router’s gateway IP address 192.168.1.1 (or, if you
prefer, type http://192.168.1.1), and press the console’s Enter key (Figure 4-2).
Figure 4-2. Browser Address Field.
NOTE: If the browser asks whether the WRT4000 Series Cellular Wireless Router (192.168.1.1) may set cookies, answer Yes, or Yes
for the Session, or something similar.
CAUTION: Do not block cookies for the WRT4000 Series Cellular Wireless Router. Otherwise, you might not be able to manage
the router.
• The browser navigates to the specified IP address and displays the WRT4000 Series Cellular Wireless Router Log-In Screen
(Figure 4-3).
Figure 4-3. WRT4000 Series Cellular Wireless Router Log-In Screen.
NOTE: The Username field might display the user name. (Figure 4-3 shows the default user name root.)
CAUTION: A message to enable JavaScript (Figure 4-4) might also display in your browser.
Javascript required!
You must enable JavaScript in your browser or the management system will not work properly.
Figure 4-4. Message to Enable JavaScript.
The WRT4000 Series Cellular Wireless Router management system uses JavaScript in its browser-based display. If you see the
message in Figure 4-4, do the following:
• On the browser menu, open Tools or Options (or an equivalent menu item in your browser).
• In the browser’s menu system, Enable JavaScript, and Save that setting.
• Right-click on the browser screen, and select Refresh, Rewrite, or Reload (or the equivalent for your browser).
• The WRT4000 Series Cellular Wireless Router Log-In Screen is redisplayed, without a message to enable JavaScript.