manualshive.com logo in svg

Black Box ServSwitch Wizard Pro SW644A, Руководство пользователя

Поделиться
Скачать
Black Box ServSwitch Wizard Pro SW644A Скачать руководство пользователя страница 30

28

SERVSWITCH WIZARD PRO

5. Operation

This chapter explains the general operation of the ServSwitch Wizard Pro. We
recommend that you read this chapter carefully before starting to use the Switch;
also make sure you have read the important note on page 19.

5.1 Power Status

At power-up, the ServSwitch Wizard Pro will try to select CPU channel #1 unless
(a) a password has been set or (b) the Switch isn’t getting enough power to
operate properly. Watch the Switch’s front-panel 7-segment display, as described 
in Figure 5-1 below: If the Switch is not receiving enough power, the display will be
blank or show “o”; if the Switch can select CPU 1, the display will show “1”; or if a
password has been set, the Switch will display “P” and remain locked until a valid
password is entered. (For the meaning of this display after power-up, see

Section 5.3

.)

Figure 5-1. The front-panel status display at power-up.

DISPLAY SHOWS:

Blank

Flashing “o”

The number “1”

The letter “P”

MEANING:

Switch is not receiving nearly

enough power to operate

Switch is getting some power,
but still not enough to operate

Switch has powered up normally

and has selected channel 1

Switch has powered up normally

but is locked and is waiting for

the password to be entered

Содержание ServSwitch Wizard Pro SW644A

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды