17
CHAPTER 3: Installation
Figure 3-1. The ServSwitch Duo cables.
Next, connect each computer or (in cascaded systems) subsidiary ServSwitch
Wizard Pro to your single/master Switch. One way to do this is to run separate
male-to-male keyboard-, mouse-, and video-extension cables from the appropriate
CPU-port connectors on the single/master Switch to (a) the keyboard, mouse, and
video ports respectively of the computer or (b) the keyboard, mouse, and monitor
connectors respectively of the control port of the subsidiary Switch. (Any unused
CPU-port or control-port connectors on the single/master Switch can be left
vacant.) Alternatively, instead of three separate cables, you can use our three-in-
one ServSwitch Duo CPU-Extension Cable (our product code EHN408), whose
design is shown in Figure 3-1 above. This cable is available in 5-foot (1.5-m),
10-foot (3-m), 30-foot (10-m), 50-ft. (15-m), and 100-ft. (30-m) lengths.
HD15
Central
video
strand
Keyboard and mouse
strands molded to sides
Cross-section:
9"
(22.9
cm)
10"
(25.4
cm)
6-Pin
mini-DIN
6-Pin
mini-DIN
