Black Box ServSelect KV119A, Инструкция по установке и эксплуатации

Страница: 55 / 84

SERVSELECT™ IP SCPS INSTALLER/USER GUIDE
54
Parameter Description
CHAR=^< char > CLI access character in the range A through
-
(dash). The
CLI access character, when pressed simultaneously with
the
Ctrl
key during a session with an attached serial device,
will suspend the session with the device and place you in
CLI command mode. This value will be used if a port’s Port
Set command contains a Char=None parameter.
Default = ^d
CONNECT=ON|OFF Enables or disables the ability to use the Connect
command from the serial CLI port. When enabled, a serial
CLI user may use the Connect command to establish a
connection to the serial device attached to another SCPS
serial port. When disabled, you cannot use the Connect
command from the serial CLI port.
Default = ON
HISTORY=HOLD|AUTO,CLEAR|KEEP
Port history fi le processing options during connection (Hold
or Auto) and when a session ends (Clear or Keep):
When Hold is specifi ed, upon connection you are informed
of how much information is in the history buffer, but it is
not displayed. When Auto is specifi ed, upon connection
you are informed of how much information is in the history
buffer, and it is then displayed.
When Clear is specifi ed, the history buffer’s content is
cleared when a session ends. When Keep is specifi ed, the
history buffer’s content is retained when a session ends.
You cannot specify both Clear and Keep or both Hold
and Auto.
Default = HOLD,CLEAR
MODEMINIT=“< init_string >”
Modem initialization string, enclosed in quotation marks.
Must contain at least ATV1 and SØ=1.
Default = “” (no modem is attached to serial CLI port)
TIMEOUT=< time-out > Number of time-out minutes in the range Ø-90. If no data
is received or transmitted during a Telnet session for the
specifi ed period, the session will time-out. A zero value
indicates no time-out. This value is used for any SCPS port
that does not have a time-out value set with the Port Set
command, or during a Telnet session to port 23.
Default = 15 minutes
Server FLASH command
The Server FLASH command updates the SCPS program images in FLASH
memory. You may want to use this command to update the program with new
features or to install a later release of the program.