Black Box ServSelect KV119A, Инструкция по установке и эксплуатации

Страница: 26 / 84

CHAPTER 4: OPERATIONS
25
If an authentication method is not specifi ed, the previous authentication
parameter will be used. The default value is AUTH=PW.
3. If you are enabling SSH for the fi rst time, you are advised that all other SCPS
sessions will be terminated. Enter
Y to continue or N to cancel. After the SCPS
database is updated, you are prompted for a reboot. Enter Y to reboot or N to
cancel the reboot.
4. If you are reenabling SSH, you are prompted to use the existing SSH server
key or generate a new key. Enter
Y to use the existing key or N to generate a
new key. After the SCPS database is updated, you are prompted for a reboot.
Enter
Y to reboot or N to cancel the reboot.
For more information, see
Server SSH command
in Chapter 6.
To disable SSH session access to the SCPS:
1. Issue a Server SSH command with the Disable parameter.
SERVER SSH DISABLE
2. You are prompted for a reboot. Enter Y to reboot or N to cancel the reboot.
When SSH is disabled, the SCPS operates in plain text mode.
To display SSH information:
Issue a Show Server Security command.
SHOW SERVER SECURITY
If SSH is enabled, the display will include SSH2. Regardless of whether SSH is
enabled, the display will indicate the authentication method that was specifi ed with
the Server SSH command.
CLI mode
While you are connected to an attached serial device, you may enter CLI mode and
enter SCPS commands.
To enter or exit CLI mode when connected to a serial device:
1. To enter CLI mode, type the CLI access character, which is Ctrl-D by default.
At the CLI prompt (>), you may enter SCPS commands.
2. To exit CLI mode and return to the session with the attached device, issue a
Resume command.
RESUME
For more information, see
Resume Command
in Chapter 6.