Black Box ServSelect KV119A, Инструкция по установке и эксплуатации

Страница: 63 / 84

SERVSELECT™ IP SCPS INSTALLER/USER GUIDE
62
Server SNMP Trap Command Parameter
Parameter Description
ENABLE|DISABLE Enable generates a numbered list of currently disabled
traps from which you choose those to enable. Disable
generates a numbered list of currently enabled traps from
which you choose those to disable.
Example
The following command enables specified SNMP traps.
server snmp trap enable
The following is an example display, from which you may specify the traps to
be enabled.
Traps now disabled:
1)
linkUp 4) userLogin
2) userAdded 5) imageUpgradeStarted
3) userDeleted
Select trap(s) to enable>
Server SNMP Trap Destination command
The Server SNMP Trap Destination command defines or deletes destinations for
enabled SNMP traps. Once you define destinations for enabled SNMP traps, when a
trap occurs, the SCPS will generate SNMP trap messages to each defined SNMP trap
destination. You may define up to four trap destinations, using separate commands.
For more information, see
Managing SNMP Structures
in Chapter 4.
Access: SCON
Syntax
SERVER SNMP TRAP DESTINATION ADD|DELETE <
ip_address
>
Server SNMP Trap Destination Command Parameters
Parameter Description
ADD|DELETE Defi nes or deletes the specifi ed destination.
< ip_address > IP address of trap destination.
Server SSH command
The Server SSH command enables or disables SSH session access to the SCPS and
specifies the SSH authentication method. When you enable SSH, all SCPS sessions
will be terminated.