Black Box ServSelect KV119A, Инструкция по установке и эксплуатации

Страница: 39 / 84

SERVSELECT™ IP SCPS INSTALLER/USER GUIDE
38
SCPSPortAlert trap is enabled with a Server SNMP Trap command.
PORT <
port
> ALERT ADD “<
string
>”
2. To delete a port alert string, issue a Port Alert Delete command, specifying a
port number.
PORT <
port
> ALERT DELETE
The SCPS displays a numbered list of alert strings that have been defi ned for
the specifi ed port with a prompt requesting you to select alert string(s) to
delete. Indicate the alert strings to be deleted by entering an alert string’s list
number, several numbers separated by commas, a range of numbers separated
by a dash or a combination of numbers with commas and dashes. To delete all
alert strings, type
ALL . To cancel the command, press Enter .
3. To copy the defi ned alert strings from one port to another port, issue a Port Alert
Copy command, specifying the port numbers to be copied to and from.
PORT <
n1
> ALERT COPY <
n2
>
At the confi rmation prompt, press Y to confi rm or N to cancel. When the copy
operation occurs, all previously defi ned strings on the port being copied to will
be replaced.
For more information, see
Port Alert Add command
,
Port Alert Copy command
and
Port Alert Delete command
in Chapter 6.
To display SNMP con fi guration information:
Issue a Show Server SNMP command.
SHOW SERVER SNMP
The display includes information specified with the Server SNMP, Server SNMP
Community, Server SNMP Manager, Server SNMP Trap and Server SNMP Trap
Destination commands.
For more information, see
Show Server SNMP command
in Chapter 6.
To display port alert string information:
Issue a Show Port Alert command, specifying a port number.
SHOW PORT <
port
> ALERT
The display lists all the port’s defined alert strings.
For more information, see
Show Port Alert command
in Chapter 6.