877-877-2269 | blackbox.com
Page 36
Chapter 3: Onboard Graphics Adapter
3.3 Using the Onboard Graphics Adapter for the VWP-2090 or VWP-2110
3.3.1 Onboard Graphics Adaptor used as Control Screen (VWP-2090 or VWP-2110)
The VWP-2090 or VWO-2110 is shipped with the BIOS configured to boot from the onboard graphics device.
This output can then be used as the control screen for a typical wall configuration.
To set the system to boot on the onboard graphics device (“nitiate Graphic Adapter” - IGD), enter setup from the
boot screen by pressing <F2> as prompted.
In the BIOS setup utility select:
Advanced>Graphic Configuration>Graphics Configuration>Primary Display Selection>Initiate Graphic Adapter -
[IGD]
Figure 3-2. VWP-2090 or VWP-2110 Control screen.
