Black Box PC118C-R2, Руководство пользователя

Страница: 125 / 130

Table C-1 (continued). Parallel-Interface Specifications.
Parallel
Signal Return Cable
Pin Pin Signal Pin Direction Description
14 — AUTO 14 IN This signal is NOT
FEED supported. Defined by
many printers to add
a LF to each CR. The
IBM 5250 protocol
does not support this
signal.
15 — NC — — Not used.
16 — GND 19 — Logic Ground.
17 — CGND — — Chassis Ground.
18 — NC — — Not used.
19-30 — GND 21-24 — Twisted-pair ground
returns listed above.
31 — INIT 16 IN Defined to reset and
clear the printer when
LOW; the reset and
clear are NOT sup-
ported by the Card.
The IBM host can’t be
interrupted by this
signal. An ACKNLG
is generated for
handshaking.
32 — ERROR 15 OUT This signal goes LOW
when the printer is in
an error state.
33 — GND 25 — Logic Ground.
34 — NC — — Not used.
35 — HIGH — — Not used.
36 — SLCTIN 17 — Not supported.
124
HPIIISi TWINAX CARD