background image

22

HPIIISi TWINAX CARD

Command:

 04, User-Defined Strings

Description:

Creates user-defined strings to be sent to the printer. Place up to 25 pairs of
hex codes, corresponding to your desired printer commands, inside a pair of
parentheses following the main command argument (the string number).
Each numbered string is stored in the Card’s memory. To send a given string,
place a “&%U

n

” (where 

n

is the string number) in the document.

For a list of available printer commands and their hex values, consult your
printer’s manual.

Possible Arguments:

Results:

0 to 9([hex codes])

Defines a numbered user string consisting of the 

specified hex codes.

0 to 9()

Deletes the specified string from memory.

Example:

“&%Z04,3(1826643044)” defines a string that tells the printer to start
underlining. After defining this string, place “&%U3” in your document
wherever you want the printer to start underlining.

Command:

 05, Host Language

Description:

Use this command to select the international character set to be used by your
twinax host when it receives the “Use Default Language” command. See your
printer’s operator’s manual for more information on character sets. When
you select a new host language, it remains in effect 

permanently

until you

specifically select a different language—even restoring factory defaults
doesn’t change this setting.

Possible

Results:

Arguments:

00

Multinational

*01

US/Canada

02

Austria/Germany

03

Belgium

04

Brazil

05

Canada (French)

06

Denmark/Norway

07

Finland/Sweden

Содержание PC118C-R2



































































































































Отзывы: