21
CHAPTER 5: Configuration
Command:
02, Alternate CPT-End Delimiter
Description:
Creates an alternate end delimiter for command pass-through. Its
characteristics are the same as those of the alternate start delimiter defined
with command 01, except that it cannot be used as an alternate host/PC
download delimiter. As with the start delimiter, the Card will always recognize
the primary CPT-end delimiter “&%” as valid even if an alternative CPT-end
delimiter has been defined.
Possible Arguments:
Results:
[Any two characters
Defines new alternate end delimiter for command
that are not both
pass-through.
spaces]
[Two spaces]
Deletes previously defined alternate end delimiter.
Example:
“&%Z02,@^” designates “@^”as an additional end delimiter for command
pass-through.
Command:
03, Host-Port Timeout
Description:
Use this command to select a new timeout value for the host port. This
timeout value is the number of seconds that the Card will wait for data from
the host before allowing the printer to honor PC print jobs.
Possible Arguments:
Results:
01 to 60
Sets new timeout value in seconds (*08, 8 seconds,
is the factory default).
Example:
“&%Z03,05” sets the host-port timeout to five seconds.
