3 • Configuring the RAS for operation
Model LRA2900A RAS Getting Started Guide
45
Configuring the RAS with a Web browser
11. Type the Calling Number Total Digits in the box provided. This setting tells the RAS how many digits to
expect from the phone company. This number is the calling party’s phone number or Caller-ID informa-
tion.
12. Set the First/Middle and Last Response Codes. These are the codes the switch expects after each digit sent
by the switch.
13. Click on
Submit
.
signaling is now configured for MFC-R2.
Note
The information entered into the Interregister Signaling section must
match the information the telco provided. If the information entered
is not the same, the RAS may not answer calls. In some installations,
the phone company will send a special tone to alert that it is done
sending the Calling Number. In this case, the value in the Total Dig-
its box does not have to match the telephone company’s exactly.
Channel assignment
This section describes configuring the RAS so it will know which channels are active. Do the following:
1. Select
T1/E1 Link
on the
Configuration Menu
. The T1/E1 Link Activity window appears (see figure 27 on
page 42).
2. Click on
Channel Assignment
. The WAN Circuit Channel Assignment window appears (see figure 31).
Figure 31. WAN Circuit Channel Assignment window
3. Click on the
Dialin
button located under
Set all channels to:
.
4. Click on
Submit Query
.
