26
Transparent with VLAN Tag on EXT MGMT Port
This parameter allows you to use all untagged data as the management domain by entering
N
,
or allows you to define a VLAN ID tag for the management domain by entering
Y
. When you
enter
Y
, this field expands to display the Management Tag field and the Management Priority
field.
WARNING
Do not leave the Management Tag field defined as zero (0). This will disable
management traffic on the Managed Media Converter. You must enter a VLAN ID
between 1 and 4094 (excluding the VLAN ID used for the Extra Tag).
Make sure that this Tag is defined identically on Host/Remote configurations, or the
Host will not be able to manage the Remote.
Extra Tag Mode
This parameter allows you to add a VLAN ID tag to all traffic (tagged or untagged) arriving on
the DATA port by entering
Y
. This ID can optionally be kept or removed when leaving the
DATA port. When you enter Y, this field expands to display the Data Tag, Data Priority,
Leave Tags on Data Port, and TPID fields. The TPID setting allows you to set the EtherType
of the Extra Tag frame to either 8100 (standard), 9100 (special use), or 9200 (special use).
TRANSPARENT MODE SETUP
Is a VLAN tag required on Management packets? [ N ]
Do you want to enter the Extra Tag mode? Enter Y for Extra Tagging.
Enter N if you do not want Extra Tags [ Y ]
The Data Tag is [20 ]
Data Priority is [7 ]
Are Extra Tags left on the Data Port? [ N ]
Select the TPID for the Extra Tag 1 = 8100, 2 = 9100, 3 = 9200
Extra Tag TPID [ 1 ] [8100]
Are VLAN Tags required on the EXT Port? [ N ]
Type S or F3 to save the new information
Type Q of F4 to quit and cancel changes
Reboot is required for any change to take affect.
TRANSPARENT MODE SETUP
Is a VLAN tag required on Management packets? [ Y ]
The Management Tag is [7 ]
Management Priority is [0 ]
Do you want to enter the Extra Tag mode? Enter Y for Extra Tagging.
Enter N if you do not want Extra Tags [ N ]
Are VLAN Tags required on the EXT Port? [ N ]
Type S or F3 to save the new information
Type Q of F4 to quit and cancel changes
Reboot is required for any change to take affect.
27
Transparent Mode Setup Screen
This parameter allows you to add the management VLAN ID tag to all untagged data arriving
at the EXT MGMT port by entering
N
, or allows you to restrict the EXT MGMT port to only
accept data tagged with the management VLAN ID by entering Y.
VLAN Mode Screen
When you enter
N
in the Transparent Mode screen (page 26), the next screen displayed is the
VLAN Mode screen:
In this screen you can set the following parameters:
•
Default Mode
•
Port VLAN on OPTICS (or UPLINK) port
•
Port VLAN on DATA port
•
Management VLAN
•
Port VLAN Filter
Saved VLAN Values <Active after reboot>. Current VLAN Values <Active now>.
VLAN IDs Priorities Tags
Current Saved Current Saved
Ports Data VLANs are used only
Optics [0 ] [
0
] [0 ] [
0
] [
N
] if Tags are enabled on both
Data [0 ] [
0
] [0 ] [
0
] [
N
] the Optics and Data Ports.
Management VLAN EXT Mgmt Tag
SNMP [0 ] [
0
] [0 ] [
0
] [
N
]
Data Vlans <Optics <----> Data>
VLAN 1 [0 ] [
0
] VLAN 12 [0 ] [
0
] VLAN 23 [0 ] [
0
]
VLAN 2 [0 ] [
0
] VLAN 13 [0 ] [
0
] VLAN 24 [0 ] [
0
]
VLAN 3 [0 ] [
0
] VLAN 14 [0 ] [
0
] VLAN 25 [0 ] [
0
]
VLAN 4 [0 ] [
0
] VLAN 15 [0 ] [
0
] VLAN 26 [0 ] [
0
]
VLAN 5 [0 ] [
0
] VLAN 16 [0 ] [
0
] VLAN 27 [0 ] [
0
]
VLAN 6 [0 ] [
0
] VLAN 17 [0 ] [
0
] VLAN 28 [0 ] [
0
]
VLAN 7 [0 ] [
0
] VLAN 18 [0 ] [
0
] VLAN 29 [0 ] [
0
]
VLAN 8 [0 ] [
0
] VLAN 19 [0 ] [
0
] VLAN 30 [0 ] [
0
]
VLAN 9 [0 ] [
0
] VLAN 20 [0 ] [
0
] VLAN 31 [0 ] [
0
]
VLAN 10 [0 ] [
0
] VLAN 21 [0 ] [
0
] VLAN 32 [0 ] [
0
]
VLAN 11 [0 ] [
0
] VLAN 22 [0 ] [
0
]
Valid Vlan IDs are between 1 and 4094. Valid priorities are between 0 and 7.
Type S or F3 to save the changes. Type Q or F4 to quit and cancel changes.
TRANSPARENT MODE SETUP
Is a VLAN tag required on Management packets? [ Y ]
The Management Tag is [7 ]
Management Priority is [0 ]
Do you want to enter the Extra Tag mode? Enter Y for Extra Tagging.
Enter N if you do not want Extra Tags [ N ]
Are VLAN Tags required on the EXT Port? [ N ]
Type S or F3 to save the new information
Type Q of F4 to quit and cancel changes
Reboot is required for any change to take affect.