30
Default Mode
Entering
N
in the Tags column of both the Optics and Data rows will place the Managed
Media Converter in Default mode.
Unit Configuration
The Managed Media Converter allows you to view unit status as well as configure some unit
features by using a serial connection or a Telnet session. From the Main Configuration screen,
press the space bar, type
unit
, and press
Enter
to open the Unit Control Settings screen. In
this screen you can view the unit FlowControl, FiberAlert/LinkLoss, Loopback, Maximum
Frame Size, and 802.1p Base Priority (logging-in as a User in a Telnet session allows you to
view these settings but prevents you from changing the settings).
Unit FlowControl –
This allows you to enable/disable Flow Control functionality on the unit
(same as Port screen option). You must enable this to use Flow Control on any port. The
settings include the following:
•
Disable FlowControl Globally
•
Enable FlowControl If Port Allows
Saved VLAN Values <Active after reboot>. Current VLAN Values <Active now>.
VLAN IDs Priorities Tags
Current Saved Current Saved
Ports Data VLANs are used only
Optics [0 ] [
0
] [0 ] [
0
] [
N
] if Tags are enabled on both
Data [0 ] [
0
] [0 ] [
0
] [
N
] the Optics and Data Ports.
Management VLAN EXT Mgmt Tag
SNMP [0 ] [
0
] [0 ] [
0
] [
N
]
Data VLAN <Optics <----> Data>
VLAN 1 [0 ] [
900
] VLAN 12 [0 ] [
911
] VLAN 23 [0 ] [
922
]
VLAN 2 [0 ] [
901
] VLAN 13 [0 ] [
912
] VLAN 24 [0 ] [
923
]
VLAN 3 [0 ] [
902
] VLAN 14 [0 ] [
913
] VLAN 25 [0 ] [
924
]
VLAN 4 [0 ] [
903
] VLAN 15 [0 ] [
914
] VLAN 26 [0 ] [
925
]
VLAN 5 [0 ] [
904
] VLAN 16 [0 ] [
915
] VLAN 27 [0 ] [
926
]
VLAN 6 [0 ] [
905
] VLAN 17 [0 ] [
916
] VLAN 28 [0 ] [
927
]
VLAN 7 [0 ] [
906
] VLAN 18 [0 ] [
917
] VLAN 29 [0 ] [
928
]
VLAN 8 [0 ] [
907
] VLAN 19 [0 ] [
918
] VLAN 30 [0 ] [
909
]
VLAN 9 [0 ] [
908
] VLAN 20 [0 ] [
919
] VLAN 31 [0 ] [
930
]
VLAN 10 [0 ] [
909
] VLAN 21 [0 ] [
920
] VLAN 32 [0 ] [
931
]
VLAN 11 [0 ] [
910
] VLAN 22 [0 ] [
921
]
Valid Vlan IDs are between 1 and 4094. Valid priorities are between 0 and 7.
Type S or F3 to save the changes. Type Q or F4 to quit and cancel changes.
------------------------- Unit Control Settings -----------------------------
Unit FlowControl
Disable FlowControl Globally
Unit FiberAlert
TXLinkLoss Plus FXLinkLoss Enabled
Unit LoopBack
No LoopBack, Normal Traffic Mode
Unit Max FrameSz
Oversized Frames:
1536
802.1p Base Pri
Base Priority 4
Brdcast Max Rate
Max Broadcast rate 1%
Use
Arrow Keys
To Move Cursor. Press
Space Bar
To Change Value.
Press
RETURN
To Set New Value. Type
Q
or
F4
to Exit.
23
Port Configuration
The Managed Media Converter allows you to view port status and configure some port
features from a serial connection or a Telnet session. From the Device-Specific options list,
type
port
and press
Enter
to be taken to the Port Status/Control screen.
In the Port Status Values area of this screen you can view the link status, link lost counter,
duplex status, and port speed.
In the Port Control Settings area of the Port screen you can set the following:
Port Enable -
Allows you to enable or disable the port. Both Port Enable and Admin Status
must be enabled (enabled and up) to enable the port. This setting can be disabled from
iView
2
.
Admin Status -
Allows you to enable (Up) or disable (Down) the port. Both Port Enable and
Admin Status must be enabled (enabled and up) to enable the port. This setting can be
disabled from MIB-II compatible software.
Port Speed Ctrl -
Allows you to set the port for Auto-Negotiation or to force one of the
following speeds:
•
10 Mbps Half-Duplex
•
10 Mbps Full-Duplex
•
100 Mbps Half-Duplex
•
100 Mbps Full-Duplex
Make sure that the port speeds on the host and remote units are configured identically.
------------------------- Port Status Values ----------------------------
Optics Data EXT Mgmt
Link Status
Up Up Down
Link Lost Cntr
0 0 0
Duplex Status
Full Full Half
Port Speed
100 Mbits 100 Mbits 10 Mbits
------------------------- Port Control Settings ---------------------------
Data EXT Mgmt
Port Enable
Enabled Enabled
Admin Status
Up
Up
Port Speed Ctrl
Autoneg. Autoneg.
Advertise Ctrl
Advert All Advert All
Advertise FlowC
Adv Flow Adv Flow
Force FlowCtrl
Frc FlowCt Flow Auto Flow Auto
Unit FlowControl
Ena. FlowC
Use
Arrow Keys
To Move Cursor. Press
Space Bar
To Change Value.
Press
RETURN
To Set New Value. Press
Q
Or
F4
To Exit