33
Echo 2 Mbps Multiplexer
TECHNICAL: 0118 931 2233
Appendix B - Approval
Requirements DO NOT change any of the wording in this section unless you are
absolutely certain about what you are doing. The entries and particular format are an
approval requirement and any change may invalidate product approval.
The Echo MULTIPLEXER carrying the BABT / CE168 assessment symbols and approval
number, is approved for connection to the networks identified in this Appendix as follows:
G.703
In the UK, to PD7024 (75 Ohm Un-balanced) via 2 x BNC connectors. The internal link
must be set to the
UK
position, as detailed in the installation instructions.
Throughout Europe (Pan European) to CTR12 based on NET12 via RJ45 Connector (120
Ohms Balanced). The internal link must be set to the
EUR
position, as detailed in the
installation instructions.
X.21/V11
Throughout Europe (Pan European) to I-CTR2 based on NET2 at rates up to and including
1984Kbps.
