Introduction
IntroductopnIntroduction
35
CHAPTER 6: Password protecting the OSD
6.4 Enabling password protection
By default, password protection is disabled.
To enable password protection:
1. From the Supervisor OSD Select Computer window press F7. The Password box
appears. See Figure 6-1.
Figure
6-1 The Enter Password box
2. Type the default password “admin”. (You can change this password when
customizing the security system).
3. Press Enter. The Password window appears. See Figure 6-2.
Figure
6-2 The Password window
4. Press
F7
. The Confirmation label appears. The password indication in the hotkey
section of the OSD changes to
PASSWORD ON
.
5. Press ‘Y’ to confirm. Password protection is now enabled.
6. Press
Esc
.
