32
CLASSWORK JUNIOR
32
5.9 Image tuning - F5
You can tune the image of any remote computer screen from the Select Computer
window.
To adjust the screen image:
1. Navigate to the remote computer you wish to adjust.
2. Press
F5
. The screen image of the selected computer appears, together with the
Image Tuning label. See Figure 5-6.
Figure
5-6 The Image Tuning label
3. Adjust the image by using the
Right
and
Left
Arrow keys.
4. When the image is satisfactory, press
Esc
.
Note
Picture quality is relative to distance. The further away a remote computer is from the Supervisor
position, the lower the image quality, and the more tuning needed. So place the higher resolution
computers closer to the Supervisor unit.
5.10 Skipping out unconnected or switched off computers- F6
When navigating through the list of computers, you can skip out the unconnected or
switched off computers. You do this with Autoskip. By default, Autoskip is activated.
To activate or deactivate Autoskip:
In the Setup window (F3), press
F6
. The F6 Autoskip in the hotkey section of the OSD
changes from ON to OFF
When Autoskip is inactive and the computer being scanned is switched off, then the
Supervisor
screen appears dark.
