30
CLASSWORK JUNIOR
30
5.7.3. Changing the SCN and DSP time spans
The
SCN
and
DSP
time spans are preset to 030 seconds. You can adjust these times to
suit your needs.
To change the time span:
1. Navigate with the Tab or Right and Left Arrow keys to the time span you want to
change.
2. Type the desired time span using the numbers above the keyboard letters.
3. Press Esc.
When typing over a group of three digits, the cursor automatically reverts to the first
digit once you edit the third digit.
5.7.4. Changing the time span of a group of computers
You can change the time spans of the
SCN
and
DSP
columns from a particular
computer downwards.
To change the time span:
1. Navigate to the time span of the first computer you wish to change.
2. Type the desired change.
3. Press
End
,
End
. The remainder of the column takes on the same change.
4. Press
Esc
.
5.7.5. Removing a computer from the scanning sequence
To remove a computer from the scanning sequence:
1. Type 000 in the
SCN
column.
2. Press
Esc
.
5.7.6. Constantly displaying the Confirmation label
To constantly display the computer Confirmation label:
1. Type 999 in the
DSP
column.
2. Press
Esc
.
