Introduction
IntroductopnIntroduction
11
CHAPTER 2: Installing the ClassWork Junior cards
Prior to installing the card:
•
Switch off all computers.
•
Disconnect all power cords.
•
In order to avoid electrostatic damage to the card; discharge any static electricity
you may be carrying. You can do this by touching any grounded object.
To install the Supervisor and Remote cards:
1. Remove computer covers.
2. Insert the Supervisor card into any available PCI slot of the designated Supervisor
computer.
3. Insert the Remote cards into any available PCI slot of the other computers.
4. Replace computer covers.
