Black & Decker DCM100B, Инструкция по использованию и уходу

Страница: 3 / 19

4
3
Product may vary slightly from what is illustrated.
1. One-piece water reservoir and brew basket cover
2. Water showerhead
3. Guide
4. Water reservoir
5. Water level window
6. Control panel
7. “Keep Hot” carafe plate
†8. 12-cup/60 oz. (1774 ml) carafe with brew-thru lid
(Part # DCM100B-01 (black), DCM100W-01 (white))
†9. Removable filter basket (Part # DCM100B-02 (black & white))
†Consumer replaceable/removable parts
How to Use
This product is for household use only.
GETTING STARTED
• Remove all packing material, and any stickers from the product.
• Remove and save literature.
• Wash all removable parts as instructed in CARE AND CLEANING section of
this manual.
• Open water reservoir/brew basket cover and pour fresh
cold water up to 12-cup level mark into the water
reservoir (B) .
• Place empty 8-12 cup basket style paper filter into
removable filter basket.
• Place basket into brew basket with the handle to the
right (C) .
• Close water reservoir/brew basket cover.
• Place lid on carafe.
• Place empty carafe on the “Keep Hot” carafe plate.
• Pull power cord out from power cord holder in back of
coffeemaker and plug into standard electrical outlet.
• Brew water through appliance following the BREWING COFFEE instructions,
without adding coffee grounds. This removes any dust or residue that may
remain in the system during the manufacturing process.
• Discard the water from the carafe and paper filter from filter basket.
• Turn off the appliance, unplug and allow it to cool down.
ADJUSTING THE POWER CORD LENGTH
You can adjust the length of the power cord to suit your needs.
To increase the length of the power cord, simply grasp the cord (not the plug) at
the rear of the coffeemaker and gently pull down and out of the slot, away from
the coffeemaker.
To decrease the length of the power cord, simply feed any excess cord into the
slot at the rear of the coffeemaker.
Lift the cord and lock it into the slot when cord is at desired length.
SETTING THE CLOCK
1. Plug appliance into standard electrical outlet.
2. The digital clock display flashes 12:00 (D) .
Note:
You must set the clock in order to use the delayed
brewing feature.
MAX
C
MAX
2
B
MAX
2
A









12:00
D