SAVE THESE INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF INJURY:
• Follow these instructions and those published by the manufacturer of any
equipment you intend to use with this unit. Review cautionary markings on
these products.
INTRODUCTION
Thank you for purchasing the
WLB36B Black & Decker
®
Bright Bar
™
. Please
read this manual carefully before use to ensure optimum performance and
avoid damage to the unit.
FEATURES
• 36 LED Bright Bar
™
offers three lighting options: 9-LED focused beam,
27-LED area light or 36-LED combined area and focused lighting
• Corded or cordless operation
• Built-in rechargeable Ni-MH battery (with supplied 120 volt AC
Charging/Power Adapter)
• High impact, shatter-resistant ABS housing
• 360° Swivel Hanging Hook for hands-free use
• Rubber Base allows unit to sit on flat surfaces
OPERATING THE UNIT
Position the unit as desired. The ON/OFF Switch on the side of the unit has
four positions.
The bottom position is OFF.
The next position up turns the 9-LED focused beam lights on.
The next position up switches the focused beam off and turns the 27-LED area
light on.
The next position up turns all 36 LEDs on.
SAFETY GUIDELINES / DEFINITIONS
DANGER:
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
CAUTION:
Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
RISK OF UNSAFE OPERATION.
When using tools or equipment, basic safety
precautions should always be followed to reduce the risk of personal injury.
Improper operation, maintenance or modification of tools or equipment could
result in serious injury and property damage. There are certain applications for
which tools and equipment are designed. Black & Decker strongly
recommends that this product NOT be modified and/or used for any
application other than for which it was designed. Read and understand all
warnings and operating instructions before using any tool or equipment.
Minimum Gage for Cord Sets
Volts
Total Length of Cord in Feet
120V
0-25
26-50
51-100 101-150
(0-7,6m)
(7,6-15,2m)
(15,2-30,4m) (30,4-45,7m)
240V
0-50
51-100
101-200 201-300
(0-15,2m)
(15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Ampere Rating
More
Not more
American Wire Gage
Than
Than
0 -
6
18
16
16 14
6 -
10
18
16
14 12
10 -
12
16
16
14 12
12 -
16
14
12
Not Recommended
3
4
WLB36B_ManualEN_080907.qxp 8/9/2007 10:16 AM Page 3
