3
E) Attention:
FE-MR18 Ring Flash
Instruction Manual
D) Technical Specifications
Guide No.
5.6m (ISO 100/21° , Full Power)
Illumination Angle
2×[Height:60 ×Width:45] (Angle adjustable)
Recycling Time
≤ 3 seconds (Full power); ≤ 1.5 seconds (Half power M/2)
Flash Duration
1/2000 seconds
No. of flash
approx. 300 times (New alkaline batteries, full power)
Color Temperature
~5600K (Daylight)
Shooting Distance
20-100cm
Modeling Lamp
Turn off automatic off after 25 seconds
Triggering
Low Voltage Triggering
Maximum size of lens
Φ77mm
Power Source
4 x 1.5V AA batteries
Dimensions
Lamp Head (L x W x D): 150cm x 130cm x 25cm
Control Panel (L x W x D): 65cm x 60cm x 92cm
Weight
264g ( Batteries excluded)
1
．
Turn off the flash when not in use. Remove the batteries if the flash unit is not
to be used for a period of time.
2
．
Avoid any scratch or worn on the lamp’s protector, so as to ensure the light
effect and guide no. would not be affected.
3
．
To ensure the guide no. quality, only press the shutter when the ready signal -
charge indicator lights up.
4
．
The flash should be stored in a cool, dry and well ventilated place. Before
shooting, please trigger the flash several times in order to restore the energy
storage capacitor to the best status.
5
．
Please do not clean the flash with petrol, alcohol or organic detergent.
。
6
．
Please DO NOT open or repair the unit yourself. If there is any defect, please
contact the experienced technician.
Adepter ring size:
52/55/58/62/67/72mm
FM1109_FE-MR18_eng
Thank you for purchasing FalconEyes’ products.
For further details of our related products, please contact your
local distributor or visit our webpage at www.falconeyes.com.hk
Thank you.
Please read this manual carefully before using this product.
