23
Figure 4.3
Screen Setup Dialog - XY mode
4.1.1 Custom Pages
Using this menu, set the channels to see on screen from the available channels set using the “Channels and Functions
On/Off” menu. The channels are divided into banks and the shown bank is set here. For example, this allows channels
1 and 10 to be shown on the screen and turn off other channels.
4.2 Freeze Screen and Cursor Measurements
Freezes the graph at the screen to perform measurements through cursors, calculations, save or print the measurements
at screen, in the F(t) mode.
When frozen, horizontal and vertical cursor icons are added to the right-hand panel. Selecting the vertical cursor icon
enables time based cursors. Move the individual cursors by the touchscreen or other mouse interface to set the
cursor positions. selecting the horizontal cursor icon
changes the available buttons in the right hand panel, See
.
Icon
Description
Undo the last cursor action completed.
Opens a dialog box for setting the signal to measure with the cursors.
Zoom the selected channel to fit within the current cursor settings.
Set the vertical axis parameters for the selected channel.
The range is the vertical span of the channel.
The center value defines what value is the middle of the axis.
The “Position” defines the vertical location of the horizontal axis (time) in percentage.
The range is from -100 to 100 %.
For example, -50 will place the horizontal axis at 2.5 divisions above the bottom of the display.
All together, the range sets how many volts tall the vertical axis is, center sets the
