24
Figure 4.4
Horizontal
Cursor Options
Figure 4.5
Time Base Setting (Time/Division)
4.3 Time Base
The trace time scale may be set to a number of values. Pressing the Timebase button on the right of the F(t) plot screen
brings up the dialog as shown in
4.4 Math
Math functions may be applied to multiple channels. To enable math functions, enable the check-box for “Math” in the
“Screen Setup” window. When enabled, the
icon is added to the right hand button panel. Pressing the
button brings up the configuration dialog shown in
. Use the arrow buttons at the top to increase of decrease
the number of math functions. Use the arrows at the bottom to change the channel on which the math is done, or press
the channel named for each row to set the desired channel. See
for the set of functions available.
The values calculated for each function configured are shown on the main plot screen, colored the same as the channel
they do math on. See
Calculated values are displayed in the plot window showing the following:
