44
(Pin 1) and Enable- (Pin 14) are opened, the
button is
disabled and the power supply’s output will remain OFF. Pressing the
button will not turn ON the output, and the display will also show
ENA.
When (Pin 1) and Enable- (Pin 14) are shorted, the
button
is enabled. This will enable the
button to allow front panel control
of the output state. If the ENA is shown on the LCD screen, press
once so that it disappears before attempting to press the
button.
BMODE
This mode allows enabling or disabling the power supply’s output using
the (Pin 1) and Enable- (Pin 14). It will also disable the
button.
When (Pin 1) and Enable- (Pin 14) are opened, the output is
OFF.
When (Pin 1) and Enable- (Pin 14) are shorted, the output is
ON.
EXTCTRL
ENABLE
(pin1) /
Enable− (pin14)
button
Output
Display
NOT ACTIVE Not Active
Enable
ON/OFF ---
ACTIVE -
AMODE
Opened
Disable
OFF
ENA
Shorted
Enable
ON/OFF ---
