BK Precision 4060B Series, Руководство по программированию

Страница: 26 / 28

Common Command Introduction 26
<parameter2> ={a integer value between 1e-6 and 75000000,
(default unit is Sa/s)}
Query Format <channel>:SRATE?
Examples Get the channel one sample rate value C1:SRATE?
Return:
C1:SRATE MODE, DDS
Set channel one to TureArb mode.
C1:SRATE MODE, TARB
Set channel one sample rate value to 1000000Sa/s.
C1:SRATE VALUE, 1000000
2.37 Harmonic Command
Description Sets or gets harmonic information. The channel current basic wave must be sine.
Command Syntax <channel>:HARMonic HARMSTATE,<value1>, HARMTY
PE, < value2>, HARMORDER,< value3>, <parameter>, <value4>,
HARMPHASE, < value5>
< value1>= <ON, OFF> < value2>= <EVEN, ODD, ALL>
< value3>={an integer value.}
<parameter> =< HARMAMP, HARMDBC>
< value4>={an integer value.}
< value5>={an integer value.}
Query Format <channel>:HARMonic?
<channel>={C1, C2}
Examples Set the channel one harmonic switch on. C1:HARMHARMSTATE, ON
Get the channel one harmonic information. C1:HARM? Return: C1:HARM HARMSTATE, ON,HARM-
TYPE, EVEN,HARMORDER, 2, HARMAMP, 0V, HARMPHASE, 0
2.38 Waveform Combining Command
Description Sets or gets waveform combining information.
Command Syntax <channel>={C1, C2} <parameter>={ON, OFF}
Query Format <channel>:CoMBiNe? <channel>={C1, C2}
Examples Turn on the waveform combining of channel one.
C1:CMBN ON Query the waveform combining state of channel two.
C2:CMBN?
Return:
C2:CMBN OFF