Common Command Introduction
IEEE standard defines the common commands used for querying the basic information of the instrument or executing
basic operations. These commands usually start with "*" and the length of the keywords of the command is usually 3
characters.
Short Long Form
Subsystem What Command/Query does
*IDN *IDN
SYSTEM Gets identification from device.
*OPC *OPC
SYSTEM Gets or sets the OPC bit (0) in the Event Status Register (ESR).
*CLS *CLS
SYSTEM Clears all the status data registers.
*ESE *ESE
SYSTEM Sets or gets the Standard Event Status Enable register (ESE).
*ESR *ESR
SYSTEM Reads and clears the contents of the Event Status Register (ESR).
*RST *RST
SYSTEM Initiates a device reset.
*SRE *SRE
SYSTEM Sets the Service Request Enable register (SRE).
*STB *STB
SYSTEM Gets the contents of the IEEE 488.2 defined status register.
*TST *TST
SYSTEM Performs an internal self-test.
*WAI *WAI
SYSTEM Wait to continue command.
CHDR COMM_HEADER
SIGNAL
Sets or gets the command returned format OUTP OUTPUT SIGNAL Sets
or gets output state.
BSWV BASIC_WAVE
SIGNAL
Sets or gets basic wave parameters.
MDWV MODULATEWAVE SIGNAL
Sets or gets modulation parameters.
SWWV SWEEPWAVE
SIGNAL
Sets or gets sweep parameters.
BTWV BURSTWAVE
SIGNAL
Sets or gets burst parameters.
PACP PARACOPY
SIGNAL
Copies parameters from one channel to the other.
ARWV ARBWAVE
DATA
Changes arbitrary wave type.
SYNC SYNC
SIGNAL
Sets or gets synchronization signal.
NBFM NUMBER_FORMAT SYSTEM Sets or gets data format.
LAGG LANGUAGE
SYSTEM Sets or gets language. SCFG SYS_CFG SYSTEM Sets or gets the
power-on system setting way.
BUZZ BUZZER
SYSTEM Sets or gets buzzer state.
SCSV SCREEN_SAVE
SYSTEM Sets or gets screen save state.
Содержание 4060B Series
Страница 1: ......
