SPP-R200II Command Manual
Rev. 1.00
BIXOLON
- 58 -
■
The same symbol data is repeatedly printed by executing Function 281 after performing Function 280.
■
The same symbol data is printed differently by executing Function 281 after setting the mode by using Functions 265.
DATAMATRIX Symbol Data (cn=51)
■
The symbol data is defined, stored to the symbol storage area by Function 380 and printed by the specification of
Function 381. The symbol data in the area remains reserved until the following processes are executed:
•
Performing Function 380
•
Performing ESC @
•
Performing the printer reset and power-off
■
The setting value of Functions 367 is utilized for the processing of Function 381. The printable area must be large
enough to accommodate different-size symbols. If not, the symbol may not be printed.
■
The same symbol data is repeatedly printed by executing Function 381 after performing Function 380.
■
The same symbol data is printed differently by executing Function 381 after setting the mode by using Functions 367.
Differences:
None
