Rev. 1.04
- 23 -
SLP-TX400x/TX403x
2-2-15 Cover Closing Mode
1) About Cover Closing Mode
• The printed area may become out of range of paper if the paper is not in the accurate
printing position when the cover is opened and closed.
• The printer is put to Cover Closing Mode instead of Print Standby Mode when the
cover is closed in order to prevent this problem, and it waits for user input.
• The status of LEDS are as follows in this mode.
- LED 1: Green Blink
- LED 2: Green Blink
• The data received during Cover Close Mode are not printed, and they are printed
automatically when the printer recovers to the Print Standby Mode.
2) How to switch the printer from Cover Close Mode to Print Standby Mode
• Press the Pause button to switch to Print Standby Mode without feeding any paper.
• Press the Feed button to feed one page to align the paper position and switch to the
Print Standby Mode.
2-2-16 Data Dump Mode
This function can be used to diagnose the communication issues when the printing does not work correctly.
In this mode, the received data are not analyzed and printed, instead they are dumped in hex format without
processing.
Turn the printer off and on to recover to the Print Standby Mode.
1) How to start Data Dump Mode
① Press the Pause button for two seconds during Print Standby Mode.
② Both LEDs will change to orange color and the printer will be set to Stand-alone Configuration Mode.
③ Press the Feed button at the 6th LED sequence in 2-2-8 (LED 1 is Orange / LED 2
is blinking Red 4 times) to enable Data Dump Mode.
2-2-17 Factory Reset
This function is used to reset the printer settings to factory default settings.
1) How to reset the printer
① Press the Pause button for two seconds during Print Standby Mode.
② Both LEDs will change to orange color and the printer will be set to Stand-alone Configuration Mode.
③ Press the Feed button at the third LED sequence in 2-2-8 (LED 1 is Green / LED
2 is blinking Red 4 times) to reset the printer to factory settings, and Smart Media
Detection function will be executed.
Содержание SLP-TX400
